Is there an easy way to tell what ratio myt diff is

[BIG GQ]

Aside from pulling the centre and doing counts or marking pinion and wheel end and turning then counting?????

[Matthew]

There should be a metal tag on one of the bolts that holds the rear cover or center to the housing that has it stamped on.... that is if it has not been apart and the tag left off!

[BIG GQ]

Thanks Matt. I'm about to go out shed and work on car so will look mate. Although my luck would have it that it couldn't be that easy

[Matthew]

What was the result ?

[BIG GQ]

Yeah as I suspected mate no tag left.

[Paul T]

If it is an open centre diff jack one side up only, mark the tailshaft flange and a corresponding mark, mark the wheel, turn flange until wheel has gone 1 full turn. Much easier with 2 people.

[BIG GQ]

Yeah that's what I'll have to do Paul. I just listed it on eBay so will have to find out ratio then update listing

[raised by monkeys]

Any one know where to get a lsd for an english axel?